3Com Switch 7750 Configuration Guide

Console Port Login Configuration with Authentication Mode Being None 39
n
Changes of the authentication mode of Console port login will not take effect
unless you quit the command-line interface and then enter it again.
Console Port Login
Configuration with
Authentication Mode
Being None
Configuration Procedure
Scheme Specify to
perform local
authentication
or RADIUS
authentication
AAA configuration
specifies whether to
perform local
authentication or
RADIUS
authentication
Optional
Local authentication is
performed by default.
Refer to “Configuring RADIUS
Authentication/Authorization
Servers” on page 525 for more.
Configure user
name and
password
Configure user
names and
passwords for
local/RADIUS users
Required
■ The user name and password
of a local user are configured
on the switch.
■ The user name and password
of a RADIUS user are
configured on the RADIUS
server. Refer to user manual
of RADIUS server for more.
Manage AUX
users
Set service type for
AUX users
Required
Perform
common
configuration
Perform common
configuration for
Console port login
Optional
Refer to “Common
Configuration” on page 37 for
more.
Table 13 Console port login configurations for different authentication modes
Authentication
mode Console port login configuration Remarks
Table 14 Console port login configuration with the authentication mode being none
Operation Command Description
Enter system view system-view -
Enter AUX user interface view user-interface aux 0 -
Configure not to authenticate
users
authentication-mode
none
Required
By default, users logging in
through the Console port
are not authenticated.