3Com Switch 7750 Configuration Guide

HABP Configuration Example 411
Network diagram
Figure 99 Network diagram for HABP configuration
Configuration procedure
1 Configure Switch B.
# Enable HABP globally.
<SW7750>system-view
[SW7750]habp enable
# Configure the HABP server.
[SW7750]habp server vlan 2
# Enable the 802.1x globally.
[SW7750]dot1x
802.1x is enabled globally.
# Enable the 802.1x on GigabitEthernet2/0/2.
[SW7750]interface GigabitEthernet 2/0/2
[SW7750-GigabitEthernet2/0/2]dot1x
802.1x is enabled on port GigabitEthernet2/0/2.
2 Configure Switch A
# Enable HABP globally.
<SW7750>system-view
System View: return to User View with Ctrl+Z.
[SW7750]habp enable
Verify the configuration on the server.
[SW7750]display habp table
MAC Holdtime Receive Port
000f-e200-5004 41 GigabitEthernet2/0/2
000f-e200-5002 41 GigabitEthernet2/0/2
Switch A Switch B
GE2/0/1 GE2/0/2