3Com Switch 7750 Configuration Guide

Displaying Common Multicast Configuration 445
Displaying Common
Multicast
Configuration
After the configuration above, you can execute the display command to verify
the configuration by checking the displayed information.
The multicast forwarding table is mainly used for debugging. Generally, you can
get the required information by checking the core multicast routing table.
Table 359 Display common multicast configuration
Operation Command Description
Display the statistics
information about the
suppression on the
multicast source port
display
multicast-source-deny
[ interface interface-type
[ interface-number ]]
You can execute the display
commanding any view.
■ If neither the port type nor the
port number is specified, the
statistics information about the
suppression on all the
multicast source ports on the
switch is displayed.
■ If only the port type is
specified, the statistics
information about the
suppression on the multicast
source ports of the type is
displayed.
■ If both the port type and the
port number is specified, the
statistics information about the
suppression on the specified
multicast source port is
displayed.