3Com Switch 7750 Configuration Guide

46 CHAPTER 3: LOGGING IN THROUGH THE CONSOLE PORT
Console Port Login
Configuration with
Authentication Mode
Being Scheme
Configuration Procedure
Table 18 Console port login configuration with the authentication mode being scheme
Operation Command Description
Enter system view system-view -
Config
ure the
authen
tication
mode
Enter the default ISP domain
view
domain domain-name Optional
By default, the local
AAA scheme is applied.
If you specify to apply
the local AAA scheme,
you need to perform
the configuration
concerning local user as
well.
If you specify to apply
an existing scheme by
providing the
radius-scheme-name
argument, you need to
perform the following
configuration as well:
■ Perform
AAA&RADIUS
configuration on the
switch. (Refer to
“AAA
Configuration” on
page 518 and
“RADIUS
Configuration” on
page 525 for more.)
■ Configure the user
name and password
accordingly on the
AAA server. (Refer to
the user manual of
AAA server.)
Specify the AAA scheme to be
applied to the domain
scheme { local | none |
radius-scheme
radius-scheme-name
[ local ] |
hwtacacs-scheme
hwtacacs-scheme-name
[ local ]}
Quit to system view quit
Create a local user (Enter local user
view.)
local-user user-name Required
No local user exists by
default.
Set the authentication password for
the local user
password { simple |
cipher } password
Required
Specify the service type for AUX users service-type terminal
[ level level ]
Required
Quit to system view quit -
Enter AUX user interface view user-interface aux 0 -