3Com Switch 7750 Configuration Guide

498 CHAPTER 48: MSDP CONFIGURATION
[SwitchF] msdp
[SwitchF-msdp] peer 192.168.3.2 connect-interface Vlan-interface101
[SwitchF-msdp] quit
# Configure MSDP peers on Switch D.
[SwitchD] msdp
[SwitchD-msdp] peer 192.168.1.1 connect-interface Vlan-interface110
[SwitchD-msdp] peer 192.168.3.1 connect-interface Vlan-interface101
[SwitchD-msdp] quit
When the multicast source S1 in PIM-SM1 sends multicast information, receivers in
PIM-SM2 and PIM-SM3 can receive the multicast data. You can use the display
msdp brief command to view the brief information of MSDP peering
relationships between the switches. The brief information about MSDP peering
relationships between Switch C, Switch D and Switch F is as follows:
[SwitchC] display msdp brief
MSDP Peer Brief Information
Peer’s Address State Up/Down time AS SA Count Reset Count
192.168.1.2 Up 00:12:27 200 13 0
[SwitchF] display msdp brief
MSDP Peer Brief Information
Peer’s Address State Up/Down time AS SA Count Reset Count
192.168.3.2 Up 00:15:32 200 8 0
[SwitchD] display msdp brief
MSDP Peer Brief Information
Peer’s Address State Up/Down time AS SA Count Reset Count
192.168.3.1 UP 01:07:08 200 8 0
192.168.1.1 UP 00:06:39 100 13 0
# View the detailed MSDP peer information on Switch F.
[SwitchC] display msdp peer-status
MSDP Peer 192.168.1.2, AS 200
Description:
Information about connection status:
State: Up
Up/down time: 00:15:47
Resets: 0
Connection interface: Vlan-interface110 (192.168.1.1)
Number of sent/received messages: 16/16
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:17:51
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0