3Com Switch 7750 Configuration Guide

536 CHAPTER 49: AAA & RADIUS & HWTACACS CONFIGURATION
information of online users to the TACACS accounting server at intervals of this
value. Even if the server does not respond, the device does not cut down the
online user.
■ The interval must be a multiple of 3.
■ The setting of real-time accounting interval somewhat depends on the
performance of the device and the TACACS server: A shorter interval requires
higher device performance.
Displaying and
Maintaining AAA &
RADIUS & HWTACACS
Information
After the above configurations, you can execute the display commands in any
view to view the operation of AAA, RADIUS and HWTACACS and verify your
configuration.
You can use the reset command in user view to clear the corresponding statistics.
Table 425 Display AAA information
Operation Command Description
Display the configuration
information about one
specific or all ISP domains
display domain [ isp-name ] You can
execute the
display
command in
any view
Display the information
about user connections
display connection [ access-type dot1x |
domain domain-name | interface
interface-type interface-number | ip ip-address
| mac mac-address | radius-scheme
radius-scheme-name | vlan vlan-id | ucibindex
ucib-index | user-name user-name ]
Display the information
about local users
display local-user [ domain isp-name |
idle-cut { disable | enable } | vlan vlan-id |
service-type { ftp | lan-access | ssh | telnet |
terminal } | state { active | block } |
user-name user-name ]
Table 426 Display and maintain RADIUS protocol information
Operation Command Description
Display the statistics about
local RADIUS authentication
server
display local-server statistics You can execute the
display command in any
view
Display the configuration
information about one
specific or all RADIUS
schemes
display radius
[ radius-scheme-name ]
Display the statistics about
RADIUS packets
display radius statistics
Display the buffered
no-response RADIUS
stop-accounting request
packets
display
stop-accounting-buffer { radiu
s-scheme radius-scheme-name |
session-id session-id |
time-range start-time stop-time
| user-name user-name }