3Com Switch 7750 Configuration Guide

AAA & RADIUS & HWTACACS Configuration Example 537
AAA & RADIUS &
HWTACACS
Configuration
Example
Remote RADIUS
Authentication of
Telnet/SSH Users
n
The configuration procedure for the remote authentication of SSH users through
RADIUS server is similar to that of Telnet users. The following description only
takes the remote authentication of Telnet users as example.
Network requirements
In the network environment shown in Figure 133, you are required to configure
the switch so that the Telnet users logging into the switch are authenticated by the
RADIUS server.
Delete the buffered
no-response stop-accounting
request packets
reset
stop-accounting-buffer { radiu
s-scheme radius-scheme-name |
session-id session-id |
time-range start-time stop-time
| user-name user-name }
You can execute the reset
command in user view
Clear the statistics about the
RADIUS protocol
reset radius statistics
Table 427 Display and maintain HWTACACS protocol information
Operation Command Description
Display the configuration or
statistic information about
one specific or all
HWTACACS schemes
display hwtacacs
[ hwtacacs-scheme-name
[ statistics]]
You can execute the
display command in any
view
Display the buffered
HWTACACS
stop-accounting request
packets that are not
responded to
display
stop-accounting-buffer { hwta
cacs-scheme
hwtacacs-scheme-name |
session-id session-id |
time-range start-time stop-time |
user-name user-name }
Clear the statistics about the
TACACS protocol
reset hwtacacs
statistics { accounting |
authentication | authorization
| all }
You can execute the reset
command in user view
Delete the buffered
stop-accounting request
packets that are not
responded to
reset
stop-accounting-buffer { hwta
cacs-scheme
hwtacacs-scheme-name |
session-id session-id |
time-range start-time stop-time |
user-name user-name }
Table 426 Display and maintain RADIUS protocol information
Operation Command Description