3Com Switch 7750 Configuration Guide

Global Address Pool-Based DHCP Server Configuration 599
Customizing DHCP
Service
With the evolution of DHCP, new options are constantly coming into being. You
can add the new options as the properties of DHCP servers by performing the
following configuration.
Configuring Gateway
Addresses for DHCP
Clients
Gateways are necessary for DHCP clients to access servers/hosts outside the
current network segment. After you configure gateway addresses on a DHCP
server, the DHCP server provides the gateway addresses to DHCP clients as well
while assigning IP addresses to them.
You can configure gateway addresses for address pools on a DHCP server.
Currently, you can configure up to eight gateway addresses for a DHCP address
pool.
Configure WINS server
addresses for DHCP clients
nbns-list ip-address&<1-8> Required
By default, no WINS server
address is configured
Configure DHCP clients to be
of a specific NetBIOS node
type
netbios-type { b-node |
h-node | m-node |
p-node }
Optional
By default, no NetBIOS node
type of the DHCP client is
specified and a DHCP client uses
an h-node
Table 467 Configure NetBIOS services for the DHCP server
Operation Command Description
Table 468 Customize DHCP service
Operation Command Description
Enter system view system-view -
Create a DHCP address pool
and enter DHCP address pool
view
dhcp server ip-pool
pool-name
Required
By default, no global DHCP
address pool is created
Configure customized options option code { ascii
ascii-string | hex
hex-string&<1-10> |
ip-address
ip-address&<1-8> }
Required
By default, no customized
option is configured
Table 469 Configure gateway addresses for DHCP clients
Operation Command Description
Enter system view system-view -
Create a DHCP address pool
and enter DHCP address pool
view
dhcp server ip-pool
pool-name
Required
By default, no global DHCP
address pool is created
Configure gateway addresses
for DHCP clients
gateway-list
ip-address&<1-8>
Required
By default, no gateway
address is configured