3Com Switch 7750 Configuration Guide

60 CHAPTER 4: LOGGING IN THROUGH TELNET
n
Refer to “AAA & RADIUS & HWTACACS Configuration Example” on page 537 and
“SSH Terminal Services” on page 773.
Table 28 Determine the command level when users logging into switches are
authenticated in the scheme mode
Scenario
Command
level
Authentication
mode User type Command
Scheme
(authentication-
mode scheme)
[ command-aut
horization ]
VTY users that
are
AAA&RADIUS
authenticated
or locally
authenticated
The user privilege level level
command is not executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command
The user privilege level level
command is executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command
VTY users that
are
authenticated
in the RSA
mode of SSH
The user privilege level level
command is not executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
The user privilege level level
command is executed, and the
service-type command does not
specify the available command level.
Determined by
the user
privilege level
level command
The user privilege level level
command is executed, and the
se
rvice-type command specifies the
available command level.
VTY users that
are
authenticated
in the password
mode of SSH
The user privilege level level
command is not executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command
The user privilege level level
command is executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command