3Com Switch 7750 Configuration Guide

688 CHAPTER 62: MIRRORING CONFIGURATION
Mirroring Supported
by the Switch 7750
Mirroring
Configuration
For mirroring features, see “Overview” on page 685.
Configuring Local Port
Mirroring
Configuration prerequisites
■ The source port is specified and whether the packets to be mirrored are
inbound or outbound is specified.
■ The destination port is specified.
Configuring port mirroring in Ethernet port view
Table 553 Mirroring functions supported by the Switch 7750 and related command
Function Description Related command Related section
Mirroring Support local port
mirroring
mirroring-group
mirroring-group mirroring-port
mirroring-group monitor-port
monitor-port
mirroring-port
“Configuring Local
Port Mirroring” on
page 688
Support remote
port mirroring
mirroring-group
mirroring-group mirroring-port
mirroring-group monitor-port
mirroring-group reflector-port
mirroring-group remote-probe
vlan
remote-probe vlan enable
“Configuring
Remote Port
Mirroring” on page
690
Support traffic
mirroring
monitor-port
mirrored-to
“Configuring Local
Traffic Mirroring”
on page 696
Support remote
traffic mirroring
mirroring-group
mirroring-group monitor-port
mirroring-group reflector-port
mirroring-group remote-probe
vlan
remote-probe vlan enable
mirrored-to inbound acl-rule
[ system-index ]{interface
interface-type interface-number
reflector | mirroring-group
group-id }
“Configuring
Remote Traffic
Mirroring” on page
697
Support mirroring
to local I/O Module
mirroring-group
mirroring-group mirroring-slot
mirroring-group monitor-slot
mirroring-group mirroring-port
“Configuring
Mirroring to Local
I/O Module” on
page 701
Table 554 Configure port mirroring in Ethernet port view
Operation Command Description
Enter system view system-view -