3Com Switch 7750 Configuration Guide

712 CHAPTER 63: CLUSTER
Enabling NDP Globally
and for Specific Ports
Enabling NTDP Globally
and for Specific Ports
Configure Member
Devices to Access
FTP/TFTP Server of the
Cluster
Perform the following configuration in user view of the member device.
Configure member devices to
access FTP/TFTP server of the
cluster
Optional “Configure Member Devices to
Access FTP/TFTP Server of the Cluster”
on page 712
Table 573 Member device configuration tasks
Operation Description Related section
Table 574 Enable NDP globally and for specific ports
Operation Command Description
Enter system view system-view -
Enable NDP globally ndp enable Required
By default, the NDP
is enabled globally.
Enable NDP
for specified
ports
In system view ndp enable interface port-list Required
By default, the NDP
is enabled for the
port.
You can choose to
enable NDP in
system view or in
Ethernet port view
In Ethernet
port view
Enter
Ethernet
port view
interface interface-type
interface-number
Enable NDP
on the port
ndp enable
Table 575 Enable NTDP globally and for specific ports
Operation Command Description
Enter system view system-view -
Enable system NTDP ntdp enable Required
By default, the NTDP is enabled
globally.
Enter Ethernet port
view
interface interface-type
interface-number
-
Enable NTDP for the
port
ntdp enable Required
By default, the NTDP is enabled for
the port.
Table 576 Configure member devices to access FTP/TFTP server of the cluster
Operation Command Description
Access the public FTP server of the
cluster
ftp cluster Optional
Download files from the public
TFTP server of the cluster
tftp cluster get source-file
[ destination-file ]
Optional
Upload files to the public TFTP
server of the cluster
tftp cluster put source-file
[ destination-file ]
Optional