3Com Switch 7750 Configuration Guide

Cluster Configuration Example 717

Add the devices connected to the management device into the cluster and

perform the following configuration on the member device.

# Connect the member device to the public remote FTP server of the cluster.

<aaa_1.3Com> ftp cluster

# Download the file named aaa.txt from the public TFTP server of the cluster to the

member device.

<aaa_1.3Com> tftp cluster get aaa.txt

# Upload the file named bbb.txt from the member device to the public TFTP server

of the cluster.

<aaa_1.3Com> tftp cluster put bbb.txt

■ Upon the completion of the above configurations, you can execute the cluster

switch-to {member-num | mac-address H-H-H } command on the

management device to switch to member device view to maintain and manage

a member device. You can then execute the cluster switch-to administrator

command to resume the management device view.

■ You can also reboot a member device by executing the reboot

member {member-num | mac-address H-H-H } [ eraseflash ] command on

the management device. For detailed information about these configurations,

refer to the preceding description in this chapter.

■ After the configuration above, on the SNMP host you can receive logs and

SMMP trap messages of all the cluster members.