3Com Switch 7750 Configuration Guide

804 CHAPTER 74: FTP AND TFTP CONFIGURATION
c
CAUTION: The FTP-related functions require that the route between a FTP client
and the FTP server is reachable.
■ FTP client
A switch can operate as an FTP client, through which you can access files on FTP
servers. In this case, you need to establish a connection between your PC and the
switch through a terminal emulation program or Telnet and then execute the ftp
X.X.X.X command on your PC (X.X.X.X is the IP address of an FTP server).
Table 638 describes the configurations needed when a switch operates as an FTP
client.
FTP Configuration: A
Switch Operating as an
FTP Server
Prerequisites
A switch operates as an FTP server. A remote PC operates as an FTP client. The
network operates properly, as shown in Figure 205.
Figure 205 Network diagram for FTP configuration
PC Log into a switch
operating as an FTP
server through an FTP
client application.
- -
Table 637 Configurations needed when a switch operates as an FTP server
Device Configuration Default Description
Table 638 Configurations needed when a switch operates as an FTP client
Device Configuration Default Description
Switch Run the ftp command
to log into a remote
FTP server directly
- To log into a remote
FTP server and
manipulate files and
directories on it, you
need to obtain a user
name and password
first.
FTP server User names,
passwords, and the
corresponding
permissions are
configured.
- -
IP network
Host Switch