3Com Switch 7750 Configuration Guide

816 CHAPTER 75: INFORMATION CENTER
hh:mm:ss” is the local time, where “hh” is in the 24-hour format, ranging from
00 to 23, both “mm” and “ss” range from 00 to 59.
yyyy” is the year.
Note that a space separates the time stamp and host name.
3 Host name
It refers to the system name of the host, which is “3Com” by default.
You can modify the host name with the sysname command. Refer to “Setting the
System Name of the Switch” on page 853.
Note that a space separates the host name and module name.
4 Module name
It indicates the modules that generate the information. The module name is in
abbreviation form to indicate different modules. Table 644 lists the name and
description of some modules generating information.
Table 644 Modules generating information
Module name Description
ACCOUNT L3+ real-time accounting module
ACL Access control list module
ADBM Address base module
AM_USERB Access management module
ARP Address resolution protocol module
BGP Border gateway protocol module
CFM Configuration file management module
CLNP Connectionless network protocol module
CLNSECHO Connectionless network protocol echo module
CLST Cluster management module
CMD Command line module
DEV Device management module
DHCP Dynamic host configuration protocol module
DHCPS DHCP server module
DHCPSNP DHCP snooping module
DIAG Diagnostics module
DLDP Device link detection protocol module
DNS Domain name system module
ENTEXMIB Entity extended MIB module
ENTITY Entity module
ESIS End system to intermediate system routing protocol module
ETH Ethernet module
FIB Forwarding module
FTPS FTP server module