3Com Switch 7750 Configuration Guide

Local Software Loading 841
Figure 216 Console port configuration dialog box
Step 5: Click the <Disconnect> button to disconnect the HyperTerminal from the
switch and then click the <Connect> button to reconnect the HyperTerminal to
the switch, as shown in Figure 217.
Figure 217 Connect and disconnect buttons
n
The new baud rate takes effect only after you disconnect and reconnect the
HyperTerminal program.
Step 6: Press <Enter> to start downloading the program. The system displays the
following information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Loading ...CCCCCCCCCC
Step 7: Choose [Transfer/Send File] in the HyperTerminal’s window, and click
<Browse> in pop-up dialog box, as shown in Figure 218. Select the software you
need to download, and set the protocol to XMODEM.