3Com Switch 7750 Configuration Guide

880 CHAPTER 81: REMOTE-PING CONFIGURATION
4 Configuring an HTTP test on a remote-ping client
Configure the source IP
address
source-ip ip-address Required
By default, no source IP
address is configured.
Configure the source port source-port port-number Optional
By default, no source port is
configured.
Configure the number of
probes per test
count times Optional
By default, each test makes
one probe.
Configure the maximum
number of history records that
can be saved
history-records number
Figure 232 Optional
By default, the maximum
number is 50.
Configure the automatic test
interval
frequency interval Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Configure the probe timeout
time
timeout time Optional
By default, a probe times out
in three seconds.
Configure the type of service tos value Optional
By default, the service type is
zero.
Configure the type of FTP
operation
ftp-operation { get | put } Optional
By default, the type of FTP
operation is get, that is, the
FTP operation will get a file
from the FTP server.
Configure an FTP login
username
username name Required
By default, neither username
nor password is configured. Configure an FTP login
password
password password
Configure a file name for the
FTP operation
filename file-name Required
By default, no file name is
configured for the FTP
operation
Start the test test-enable Required
Display test results display remote-ping results
[ admin-name operation-tag ]
Required
You can execute the
command in any view.
Table 696 Configure an FTP test on a remote-ping client
Operation Command Description
Table 697 Configure an HTTP test on a remote-ping client
Operation Command Description
Enter system view system-view -