3Com Switch 7750 Configuration Guide

882 CHAPTER 81: REMOTE-PING CONFIGURATION
5 Configuring jitter test on remote-ping client
Configure the type of HTTP
operation
http-operation { get | post } Optional
By default, the type of HTTP
operation is get, that is, the
HTTP operation will get data
from the HTTP server.
Configure the HTTP operation
string and version in an HTTP
test
http-string string version Required
By default, HTTP operation
string and version are not
configured.
Start the test test-enable Required
Display test results display remote-ping results
[ admin-name operation-tag ]
Required
You can execute the
command in any view.
Table 697 Configure an HTTP test on a remote-ping client
Operation Command Description
Table 698 Configure jitter test on remote-ping client
Operation Command Description
Enter system view system-view -
Enable the remote-ping client
function
remote-ping-agent enable Required
By default, the remote-ping
client function is disabled.
Create a remote-ping test
group and enter its view
remote-ping
administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type test-type jitter Required
By default, the test type is
ICMP.
Configure the destination IP
address
destination-ip ip-address Required
The destination address must
be the IP address of a UDP
listening service on the
remote-ping server.
By default, no destination
address is configured.
Configure the destination
port
destination-port
Port-number
Required
The destination port must be
the port of a UDP listening
service on the remote-ping
server.
By default, no destination port
is configured.
Configure the source IP
address
source-ip ip-address Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number Optional
By default, no source port is
configured.