3Com Switch 7750 Configuration Guide

Remote-ping Configuration 883
6 Configuring SNMP test on remote-ping client
Configure the number of
probes per test
count times Optional
By default, each test makes
one probe.
Configure the maximum
number of history records that
can be saved
history-records number
Figure 236 Optional
By default, the maximum
number is 50.
Configure the packet size datasize size Optional
By default, the packet size is
68 bytes.
Configure the automatic test
interval
frequency interval Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Configure the probe timeout
time
timeout time Optional
By default, a probe times out
in three seconds.
Configure the type of service tos value Optional
By default, the service type is
zero.
Configure the number of test
packets that will be sent in
each jitter probe
jitter-packetnum number Optional
By default, each jitter probe
will send 10 packets.
Configure the interval to send
test packets in the jitter test
jitter-interval interval Optional
By default, the interval is 20
milliseconds.
Start the test test-enable Required
Display test results display remote-ping results
[ admin-name operation-tag ]
Required
You can execute the
command in any view.
Table 698 Configure jitter test on remote-ping client
Operation Command Description
Table 699 Configure SNMP test on remote-ping client
Operation Command Description
Enter system view system-view -
Enable the remote-ping client
function
remote-ping-agent enable Required
By default, the remote-ping
client function is disabled.
Create a remote-ping test
group and enter its view
remote-ping
administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type test-type snmpquery Required
By default, the test type is
ICMP.