3Com Switch 7750 Configuration Guide

886 CHAPTER 81: REMOTE-PING CONFIGURATION
8 Configuring UDP test on remote-ping client
Display test results display remote-ping results [
admin-name operation-tag ]
Required
The display command can be
executed in any view.
Table 700 Configure TCP test on remote-ping client
Operation Command Description
Table 701 Configure UDP test on remote-ping client
Operation Command Description
Enter system view system-view -
Enable the remote-ping client
function
remote-ping-agent enable Required
By default, the remote-ping
client function is disabled.
Create a remote-ping test
group and enter its view
remote-ping
administrator-name
operation- tag
Required
By default, no test group is
configured.
Configure the test type test-type { udpprivate |
udppublic }
Required
By default, the test type is
ICMP.
Configure the destination
address
destination-ip ip-address Required
This IP address and the one
configured on the
remote-ping server for
listening service must be the
same.
By default, no destination
address is configured.
Configure the destination
port
destination-port
port-number
■ Required in a Udpprivate
test
■ A Udppublic test is a UDP
connection test on port 7.
Use the
remote-ping-server
udpecho ip-address 7
command on the server to
configure the listening
service port; otherwise the
test will fail. No port
number needs to be
configured on the client;
any destination port
number configured on the
client will not take effect.
■ By default, no destination
port number is configured.
Configure the source IP
address
source-ip ip-address Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number Optional
By default, no source port is
specified.