3Com Switch 7750 Configuration Guide

Remote-ping Configuration 887
9 Configuring DNS test on remote-ping client
Configure the number of
probes per test
count times Optional
By default, one probe is made
per test.
Configure the maximum
number of history records that
can be saved
history-records number
Figure 239 Optional
By default, the maximum
number is 50.
Configure the data packet
size
datasize size Optional
By default, the data packet
size is 100 bytes.
Configure the automatic test
interval
frequency interval Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Configure the probe timeout
time
timeout time Optional
By default, a probe times out
in three seconds.
Configure the service type tos value Optional
By default, the service type is
zero.
Start the test test-enable Required
Display test results display remote-ping results [
admin-name operation-tag ]
Required
The display command can be
executed in any view.
Table 701 Configure UDP test on remote-ping client
Operation Command Description
Table 702 Configure DNS test on remote-ping client
Operation Command Description
Enter system view system-view -
Enable the remote-ping client
function
remote-ping-agent enable Required
By default, the remote-ping
client function is disabled.
Create a remote-ping test
group and enter its view
remote-ping
administrator-name
operation- tag
Required
By default, no test group is
configured.
Configure the source IP
address
source-ip ip-address Optional
By default, no source IP
address is specified.
Configure the test type test-type dns Required
By default, the test type is
ICMP.
Configure the number of
probes per test
count times Optional
By default, one probe is made
per test.