3Com Switch 8800 Family Command Reference Guide

1032 CHAPTER 61: SYSTEM MAINTENANCE COMMANDS
display users Syntax
display users [ all ]
View
Any view
Parameter
all: Displays all users connected to the switch.
Description
Use the display users command to view information about users connected to
the switch.
Example
# Display the information about all the active users on the console.
<SW8800> display users
UI Delay Type Ipaddress Username
+ 0 CON 0 00:00:00
130 VTY 0 00:00:05 TEL [phone] tb
# Display the information about all the users on the console.
<SW8800> display users all
UI Delay Type Ipaddress Username
+ 0 CON 0 00:00:00
129 AUX 0
+ 130 VTY 0 00:00:16 TEL [phone] tb
131 VTY 1
132 VTY 2
133 VTY 3
134 VTY 4
display version Syntax
display version
View
Any view
Tabl e 152 Description on the fields of the display users command
Field Description
+ Information about an active user
UI The first number is the absolute number of the UI (user interface), and the second
number is the relative number of the UI.
Delay The time elapsing after the last user input, in the format of hh:mm:ss
Type User type, such as Telnet, SSH, PAD
Ipaddress Initial connection location, that is, the IP address of the incoming host
Username Name of the user who uses this UI, that is, the login username of this user. If the
current terminal line is in anonymous login mode (AAA authentication is enabled
on it), this field is null