3Com Switch 8800 Family Command Reference Guide

NQA Configuration Commands 1075
administrator-name: Name of the administrator who creates the operation.
test-tag: Tag of the test operation.
Description
Use the display nqa command to display the result of the test.
If you do not specify the administrator-name and the test-operation-tag
arguments, results of all test groups are displayed. Otherwise, only the result of
the specified test group is displayed.
Example
# Display the test results.
<SW8800> display nqa results administrator icmp
nqa entry(admin administrator, tag icmp) test result:
Destinationip address:192.168.80.80
Vpn-instance: NULL
Send operation times: 5 Receive response times: 5
Min/Max/Average Round Trip Time: 1/2/1
Square-Sum of Round Trip Time: 13
Last complete test time: 2005-11-02 16:28:55.0
Extend result:
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors:0 Drop operation number:0
Operation statistics errors:0
<SW8800> display nqa history administrator icmp
nqa entry(admin administrator, tag icmp) history record:
Index Response Status LastRC Time
1 1 1 0 2005-11-02 16:28:55.0
2 1 1 0 2005-11-02 16:28:55.0
3 1 1 0 2005-11-02 16:28:55.0
4 1 1 0 2005-11-02 16:28:55.0
5 1 1 0 2005-11-02 16:28:55.0
Tab le 156 Description on the fields of the display nqa result command
Field Description
Destion ip address Destination IP address
Vpn-instance VPN identification, NULL means no identification is set.
Send operation times Number of times the operation is sent
Receive response times Number of times of the successful test operations
Min/Max/Average Round Trip Time Minimum/maximum/average round trip time
Square-Sum of Round Trip Time The square sum of the round trip time
Last complete test time Time of the last successful test
Disconnect operation number Number of times of disconnections by the opposite side
System busy operation number Number of times the test fails because the system is busy
Operation sequence errors Number of received sequence error packets
Operation timeout number Number of timeouts
Connection fail number Number of connection failures
Drop operation number Number of system resource allocation errors
Operation statics errors Number of other errors