3Com Switch 8800 Family Command Reference Guide

IP Performance Configuration Commands 115
Example
# Display the state of all TCP connections.
<SW8800> display tcp status
TCPCB Local Add:port Foreign Add:port State
03e37dc4 0.0.0.0:4001 0.0.0.0:0 Listening
04217174 100.0.0.204:23 100.0.0.253:65508 Established
The displayed information indicates that a TCP connection is established. The local
IP address of this TCP connection is 100.0.0.204, and the local port number is 23.
The remote IP address is 100.0.0.253, and the remote port number is 65508. In
addition, there is a local server process which listens to the port 4001.
display udp statistics Syntax
display udp statistics
View
Any view
Parameter
None
Description
Use the display udp statistics command to view UDP traffic statistic information.
It displays the statistic information of all current UDP connections. The statistics
information about UDP packets are divided into two major kinds which are
received packets and sent packets. The packets are further divided into different
types such as check packets and error packets. There are also some statistics
related closely to the connections, such as the number of broadcast packets. All
these displayed information are measured in packets.
Related command: reset udp statistics.
Example
# Display the UDP traffic statistic information.
<SW8800> display udp statistics
Received packet:
Total:0
checksum error:0
shorter than header:0, data length larger than packet:0
no socket on port:0
broadcast:0
not delivered, input socket full:0
input packets missing pcb cache:0
Sent packet:
Total:0
Tab le 17 Description on the fields of the display udp statistics command
Field Description
Received packet:
Total: 0
Total received UDP packets: 0