3Com Switch 8800 Family Command Reference Guide

248 CHAPTER 17: QOS COMMANDS
After entering conform level view, you can configure the "DSCP + Conform-level
-> Service-parameter" mapping table of the corresponding level. For example, you
can enter conform level 0 view and configure the "DSCP + Conform-level 0 ->
Service-parameter" mapping table.
Example
# Configure the " DSCP + Conform-level 0 -> Service-parameter " mapping table.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800]qos conform-level 0
[3Com-conform-level-0] dscp 0: 0 0 0 0 0
[3Com-conform-level-0] dscp 8 10 : 8 0 1 1 0
[3Com-conform-level-0] dscp 16 18: 16 0 2 2 0
[3Com-conform-level-0] dscp 24 26 : 24 0 3 3 0
[3Com-conform-level-0] dscp 32 34 : 32 0 4 4 0
[3Com-conform-level-0] dscp 40 46: 40 0 5 5 0
[3Com-conform-level-0] dscp 48 : 48 0 6 6 0
[3Com-conform-level-0] dscp 56 : 56 0 7 7 0
The configured mapping table:
exp Syntax
exp exp-list : dscp-value exp-value cos-value local-precedence-value
drop-precedence
undo exp exp-list
View
Conform level view
Tabl e 33 " DSCP + Conform-level - Service-parameter " mapping table
DSCP CL
Policed-
DSCP
Policed-ex
p
Policed-
802.1p
Policed-
Localprec
Policed-
Drop
Precedenc
e
0 0 0 0 0 0 0
8 0 8 0 1 1 0
10 0 8 0 1 1 0
16 0 16 0 2 2 0
18 0 16 0 2 2 0
24 0 24 0 3 3 0
26 0 24 0 3 3 0
32 0 32 0 4 4 0
34 0 32 0 4 4 0
40 0 40 0 5 5 0
46 0 40 0 5 5 0
48 0 48 0 6 6 0
56 0 56 0 7 7 0