3Com Switch 8800 Family Command Reference Guide

802.1x Configuration Commands 295
Total maximum 802.1x user resource number is 2048
Total current used 802.1x resource number is 0
Ethernet3/1/1 is link-down
802.1X protocol is disabled
Proxy trap checker is disabled
Proxy logoff checker is disabled
The port is a(n) authenticator
Authenticate Mode is auto
Port Control Type is Mac-based
Max on-line user number is 1024
... (Omitted)
dot1x Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
Tab le 40 Description of 802.1x configuration information
Field Description
Equipment 802.1X protocol is enabled 802.1X protocol is enabled on the switch.
CHAP authentication is enabled CHAP authentication is enabled
DHCP-launch is disabled If any user configures a static IP without
authorization in DHCP environment, the
switch will trigger authentication on the user.
Proxy trap checker is disabled
The system does not check the access of users
who log on through a proxy.
Proxy logoff checker is disabled
Transmit Period Transmit interval timer
Handshake Period The interval of sending handshake packets of
802.1x
Quiet Period Quiet period set by Quiet timer
Quiet Period Timer is disable Quiet Period Timer is disable
Supp Timeout Timeout timer for Supplicant authentication
Server Timeout Timeout timer for Authentication Server
The maximal retransmitting times The maximal times for the Ethernet switch to
retransmit authentication request frames to
access user
Total maximum 802.1x user resource number The maximum number of access users allowed
Total current used 802.1x resource number Number of access users currently on line
Ethernet3/1/1 is link-up The state of Ethernet 2/1/1 is Up.
802.1X protocol is disabled 802.1X protocol is disabled on the port
Proxy trap checker is disabled
The port prohibits the access of users who log
on through a proxy
Proxy logoff checker is disabled
The port is a(n) authenticator The port acts as authenticator
Authenticate Mode is auto The authentication mode of the port is Auto
Port Control Type is Mac-based The port control type is Mac-based, namely,
authentication of access users is implemented
based on the MAC address.
Max on-line user number The maximum number of on-line users
... Omitted