3Com Switch 8800 Family Command Reference Guide

AAA Configuration Commands 319
Example
# Create a local IP address pool ranging from 129.102.0.1 to 129.102.0.10.
[SW8800] domain 3com163.net
[3Com-isp-3com163.net] ip pool 0 129.102.0.1 129.102.0.10
level Syntax
level level
undo level
View
Local user view
Parameter
level: User priority, an integer ranging from 0 to 3.
Description
Use the level command to set user priority.
Use the undo level command to restore the default user priority.
By default, the user priority is 0.
Related command: local user.
n
If you specify not to authenticate or to authenticate by passwords, the levels of the
commands available to an authenticated user are determined by the priority of the
user interface. If a user needs to provide user name and password to pass the
authentication, the levels of the commands available to an authenticated user are
determined by the priority of the user.
Example
# Set the user priority to 3.
[3Com-luser-3com1] level 3
local-user Syntax
local-user { username | multicast [ domain domain-name ] ipaddress |
password-display-mode { auto | cipher-force } }
undo local-user { username | all [ service-type { ftp | lan-access | telnet | ppp |
ssh | terminal } ] | multicast [ domain domain-name ] ipaddress |
password-display-mode }
View
System view
Parameter
username : Name of the user.
all: All users.