3Com Switch 8800 Family Command Reference Guide

334 CHAPTER 21: AAA AND RADIUS/HWTACACS PROTOCOL CONFIGURATION COMMANDS
display
stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name |
session-id session-id | time-range start-time stop-time | user-name user-name }
View
Any view
Parameter
radius-scheme radius-server-name: Configures to display the saved stopping
accounting requests according to RADIUS scheme name. radius-server-name
specifies the RADIUS scheme name with a character string not exceeding 32
characters.
session-id session-id: Configures to display the saved stopping accounting
requests according to the Session ID. session-id specifies the Session ID with a
character string not exceeding 50 characters.
time-range start-time stop-time: Configures to display the saved stopping
accounting requests according to the saving time. start-time specifies the start
time of the saving time range and stop-time specifies the stop time of the saving
time range. The time is expressed in the format hh:mm:ss-yyyy/mm/dd. When this
parameter is specified, all the stopping accounting requests saved in the time
range since start-time to stop-time will be displayed.
user-name user-name: Configures to display the saved stopping accounting
requests according to the username. User-name specifies the username, a
character string not exceeding 32 characters, excluding "/", ":", "*", "?", "<"
and ">". The @ character can only be used once in one username. The pure
username (the part before @, namely the user ID) cannot exceed 24 characters.
Description
Use the display stop-accounting-buffer command to view the stopping
accounting requests, which have not been responded and saved in the buffer. You
can select to display the packets sent to a certain RADIUS scheme, or display the
packets according to user Session ID or username. You may also display the
DEAD Dead state
AuthProc Processing authentication
AuthSucc Authentication successful
AcctStart Starting accounting
RLTSend Sending real time accounting
RLTWait Waiting for real time accounting
AcctStop Stop waiting for accounting
OnLine Online
Stop Stop
StateErr State error
Table 43 Description on the fields of the display radius statistics command
Field Description