3Com Switch 8800 Family Command Reference Guide

370 CHAPTER 22: PORTAL CONFIGURATION COMMANDS
View
Any View
Parameter
acm statistics: Displays the statistics about ACM, that is to say, displays the
statistics about the state machines related with authentication, connection and
management.
auth-network auth-vlan-id: Displays the authentication network section.
auth-vlan-id is the ID of the VLAN where the access port (where the authentication
users access into the switch across the network) lies in.
free-ip: Displays the configured authentication-free IP addresses.
free-user: Displays the configured authentication-free users.
server server-name: Displays the information about the Portal server with the
specified name.
server statistics: Displays the statistics about the Portal server.
tcp-cheat statistics: Displays the statistics about TCP cheats.
ipaddress: Information about users using the specified IP address.
interface-type: Port type, whose value is Ethernet or GigabitEthernet.
interface-number: Port number, expressed in the form of slot number/card
number/port number.
vlan vlan-id: Displays the information about all the users in a VLAN.
Description
Use the display portal command to display the information about Portal.
Example
# Display the information about Portal.
[SW8800] display portal
This operation may take few minutes ,please wait
Run Method:
Direct
Free IP:
1)IP = 192.168.0.200 Net Mask = 255.255.255.255
Authenticate network:
1)IP = 1.1.1.1 Net Mask = 255.255.0.0 VLAN = 3
Free User:
No Free User
Portal Server:
1)pt2:
IP = 192.168.0.200
Key = 3com
Port = 2000
URL = "http://192.168.0.200/portal/index_default.jsp"
ARP-HandShake: