3Com Switch 8800 Family Command Reference Guide

424 CHAPTER 25: OSPF CONFIGURATION COMMANDS
display ospf brief Syntax
display ospf [ process-id ] brief
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf brief command to view the main summary of OSPF.
Example
# Display the OSPF summary.
<SW8800> display ospf brief
OSPF Process 1 with Router ID 10.110.95.189
OSPF Protocol Information
RouterID: 10.110.95.189 Border Router: Area AS
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 0.0.0.1 Type: 2
SPF computation count: 16
Area Count: 1 Nssa Area Count: 0
Area 0.0.0.0:
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR Type: Broadcast
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
mask Mask
tag Tag
status
Status information, including two values:
DoNotAdvertise
The summary routing information to the
network segment will not be advertised
Advertise
The summary routing information to the
network segment will be advertised
Table 55 Description of the fields of the display ospf asbr-summary command
Field Description
Tabl e 56 Description of the fields of the display ospf brief command
Field Description
RouterID Router ID of the router
Border Router Border routers for connection to the area, including autonomous
system border router (ASBR) and area border router (ABR)
spf-schedule-interval Interval of SPF schedule in seconds
Authtype Authentication type of OSPF