3Com Switch 8800 Family Command Reference Guide

OSPF Configuration Commands 429
Priority: 1
Designated Router: 10.110.10.1
Backup Designated Router: 10.110.10.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
display ospf lsdb Syntax
display ospf [ process-id ] [ area-id ] lsdb [ brief | [ asbr | ase | network | nssa |
router | summary [ verbose ] ] [ ip-address ] [ originate-router ip-address |
self-originate ] [ verbose ] ]
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
area-id: ID of the OSPF area, which can be a decimal integer in the range 0 to
4,294,967,295 or in IP address format.
brief: Views brief database information.
asbr: Views the database information of Type-4 LSA (summary-Asbr-LSA).
ase: Views the database information of Type-5 LSA (AS-external-LSA).
network: Views the database information of Type-2 LSA (Network-LSA).
nssa: Views the database information of Type-7 LSA (NSSA-external-LSA).
router: Views the database information of Type-1 LSA (Router-LSA).
summary: Views the database information of Type-3 LSA (Summary-Net-LSA).
ip-address: Link state ID in IP address format.
Tab le 59 Description of the fields of the display ospf interface command
Field Description
Cost Cost of the interface
State State of the interface state machine
Type Network type of OSPF on the interface
Priority Priority of the interface for DR election in its network
Designated Router DR on the network in which the interface resides
Backup Designated
Router
BDR on the network in which the interface resides
Timers
OSPF timers, defining as follows:
Hello Interval of Hello packet
Dead Interval of dead neighbors
Poll Interval of poll
Retransmit Interval of retransmitting LSA
Transmit Delay Delay time of transmitting LSA