3Com Switch 8800 Family Command Reference Guide

BGP Configuration Commands 511
display bgp
routing-table as-path-acl
Syntax
display bgp routing-table as-path-acl acl-number
View
Any view
Parameter
acl-number: Specifies matched AS path list number ranging from 1 to 199.
Description
Use the display bgp routing-table as-path-acl command to view routes that
match an as-path acl.
Example
# Display routes that match the as-path-acl 1.
<SW8800> display bgp routing-table as-path-acl 1
Flags: # - valid, ^ - best,
D - damped, H - history,
I - internal, S - aggregate suppressed
B - balance
Dest/Mask Pref Next-Hop Med Local-pref Origin As-path
--------------------------------------------------------------------
#^ 1.1.1.0/24 256 10.10.10.1 0 IGP 200
#^ 1.1.2.0/24 256 10.10.10.1 0 IGP 200
#^ 1.1.3.0/24 256 10.10.10.1 0 IGP 200
#^ 2.2.3.0/24 256 10.10.10.1 0 INC 200
#^ 4.4.4.0/24 256 10.10.10.1 0 INC 200
#^ 9.9.9.0/24 256 10.10.10.1 0 INC 200
#^ 10.10.10.0/24 256 10.10.10.1 0 IGP 200
#^ 22.1.0.0/16 256 200.1.7.2 100 INC 200
# 88.1.0.0/16 60 0.0.0.0 IGP
As-path
AS-path attribute of route, which records all AS areas that the route passes. With
it, route loop can be avoided
Table 74 Description of the fields of the display bgp routing-table command
Field Description
Tab le 75 Description of the fields of the display bgp routing-table as-path-acl command
Field Description
Dest/Mask Destination address/Mask
Pref Preference
Nexthop IP address of next hop
Med MULTI_EXIT_DISC attribute value
Local-pref Local preference