3Com Switch 8800 Family Command Reference Guide

34
STATIC MULTICAST MAC ADDRESS
CONFIGURATION COMMAND
Static Multicast MAC
Address Configuration
Command
mac-address multicast Syntax
mac-address multicast mac-addr interface { { interface-type interface-number } [
to { interface-type interface-number } ] } &<1-10> vlan vlan-id
undo mac-address multicast [ [mac-addr] vlan vlan-id ]
undo mac-address multicast mac-addr interface { { interface-type
interface-number } [ to { interface-type interface-number } ] } &<1-10> vlan
vlan-id
View
System view
Parameter
mac-addr: Multicast group address.
interface-type interface-number: Interface type and interface number. Refer to the
Port Configuration part of the book.
to: Defines a range of multicast MAC ports. Before to is the initial interface and
after to is the terminal interface. Interfaces from the initial interface to the
terminal interface form an interface list.
vlan-id: ID of the VLAN
Description
Use the mac-address multicast command to add multiple ports into static
multicast MAC group.
Use the undo mac-address multicast command to delete the specified static
multicast MAC group or to delete multiple ports from the static multicast MAC
group.
Only Ethernet ports supported, and the ports must not join an aggregation group
and must not be LACP enabled.
The configured multicast MAC should not be any multicast MAC address used by
a known protocol. For example, 0100-5E00-0005 is the multicast MAC address
used by the OSPF protocol.