3Com Switch 8800 Family Command Reference Guide

PIM Configuration Commands 623
send: Debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv | jp | reg | regstop: Packets type.
Description
Use the debugging pim sm command to enable PIM-SM debugging functions.
Use the undo debugging pim sm command to disable the debugging functions.
By default, PIM-SM debugging functions are disabled.
Example
# Enable all PIM-SM debugging functions
<SW8800> debugging pim sm all
display pim bsr-info Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Use the display pim bsr command to view the BSR information.
Related command: c-bsr, c-rp.
Example
<SW8800> display pim bsr-info
Current BSR Address: 192.168.1.1
Priority: 0
Mask Length: 30
Expires: 00:01:26
Bootstrap-Period: 60 seconds
Bootstrap-Timeout: 130 seconds
Local host is BSR
Tab le 87 Description on the fields of the display pim bsr command
Field Description
BSR Boot strap router
Priority Priority of BSR
Mask Length: 30 Length of mask
Expires: 00:01:55 Expire time
BootStrap-Period: 60 seconds Boot strap interval
Bootstrap-timeout: 130
second
Boot strap timeout