3Com Switch 8800 Family Command Reference Guide

636 CHAPTER 36: PIM CONFIGURATION COMMANDS
Example
# Configure 10.110.0.6 as a static RP.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] multicast routing-enable
[SW8800] pim
[3Com-pim] static-rp 10.110.0.6
# Remove the static RP with the IP address of 10.110.0.6.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] multicast routing-enable
[SW8800] pim
[3Com-pim] undo static-rp 10.110.0.6