3Com Switch 8800 Family Command Reference Guide

DHCP Relay Configuration Commands 853
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] dhcp server detect
display dhcp relay
address
Syntax
display dhcp relay address { interface vlan-interface vlan-id | all }
View
Any view
Parameter
vlan-id: VLAN number.
interface vlan-interface: Specifies to display information about the DHCP servers
configured for the VLAN interface.
all: Specifies to display information about the DHCP servers configured for all
VLAN interfaces.
Description
Use the display dhcp relay address command to display information about
DHCP servers configured for a VLAN interface.
Example
# Display information about DHCP servers configured for all VLAN interfaces.
<SW8800> display dhcp relay address all
** Vlan-interface192 DHCP Relay Address **
Relay Address [0] : 193.193.1.1
Relay Address [1] : 1.1.1.1
# Display information about DHCP servers configured for VLAN interface 192.
<SW8800> display dhcp relay address interface vlan 192
** Vlan-interface192 DHCP Relay Address **
Relay Address [0] : 193.193.1.1
Relay Address [1] : 1.1.1.1
display
dhcprelay-security
Syntax
display dhcprelay-security [ ip-address ]
View
Any view
Parameter
ip-address: User IP address.
Description
Use the display dhcprelay-security command to display information about
specific or all user address entries that the DHCP server maintains.