3Com Switch 8800 Family Command Reference Guide

52
UDP HELPER CONFIGURATION
COMMANDS
UDP Helper
Configuration
Commands
debugging udp-helper Syntax
debugging udp-helper { event | packet [ receive | send ] }
undo debugging udp-helper { event | packet [ receive | send ] }
View
User view
Parameter
event: Enables event debugging for UDP Helper.
packet: Enables packet debugging for UDP Helper.
receive: Enables incoming packet debugging for UDP Helper.
send: Enables outgoing packet debugging for UDP Helper.
Description
Use the debugging udp-helper command to enable UDP Helper debugging.
Use the undo debugging udp-helper command to disable UDP Helper
debugging.
By default, UDP Helper debugging is disabled.
Example
# Enable packet debugging for UDP Helper.
<SW8800> debugging udp-helper packet
display udp-helper Syntax
display udp-helper { server [ interface vlan-interface vlan-id ] | port }
View
Any view
Parameter
vlan-id: ID of a VLAN.