3Com Switch 8800 Family Command Reference Guide

918 CHAPTER 54: RMON CONFIGURATION COMMANDS
display rmon event Syntax
display rmon event [ event-table-entry ]
View
Any view
Parameter
event-table-entry: Entry index of event table.
Description
Use the display rmon event command to view RMON events.
The display includes event index in event table, owner of the event, description to
the event, action caused by event (log or alarm information), and occurrence time
of the latest event (counted on system initiate/boot time in centiseconds).
Related command: rmon event.
Example
# Show the RMON event.
<SW8800> display rmon event
Event table 1 owned by null is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
display rmon eventlog Syntax
display rmon eventlog [ event-number ]
View
Any view
Parameter
event-number: Entry index of event table.
startup First triggering
When startup enables :
risingOrFallingAlarm
Type of the first alarm. The startup may trigger rising threshold
alarm, falling threshold alarm, or both.
Latest value Last sample value
Table 129 Description on the fields of the display rmon alarm command
Field Description
Tabl e 130 Description on the fields of the display rmon event command
Field Description
Event table 1 Index in event table
VALID The entry corresponding to the index is valid
Description Event description
Cause log-trap when triggered, When the event is triggered, it will cause the log-trap.
Last triggered at 0days
00h:02m:27s
The last triggered time is 00h:02m:27s