3Com Switch 8800 Family Command Reference Guide

920 CHAPTER 54: RMON CONFIGURATION COMMANDS
packets :0 , broadcast packets :0
multicast packets :0 , CRC alignment errors :0
undersize packets :0 , oversize packets :0
fragments :0 , jabbers :0
collisions :0 , utilization :0
display rmon prialarm Syntax
display rmon prialarm [ prialarm-table-entry ]
View
Any view
Parameter
prialarm-table-entry: Entry index of extended RMON alarm table.
Description
Use the display rmon prialarm command to view information about extended
RMON alarm table.
Related command: rmon prialarm.
Example
# Display the information about extended RMON alarm table.
<SW8800> display rmon prialarm
Prialarm table 1 owned by monitor is UNDERCREATION.
Samples type : changeratio
Variable formula : (.1.3.6.1.2.1.2.2.1.10.201326601+.1.3.6.1.2.1.2.2.1.16
Tabl e 132 Description on the fields of the display rmon history command
Field Description
Samples interface The sampled interface
History control entry Index number in history control table
VALID The entry corresponding to the index is valid
Sampling interval Sampling interval
buckets Records in history control table
Latest sampled
values
The latest sample information
dropevents Dropping packet events
octets Sent/Received octets in sampling time
packets Packets sent/received in sampling time
broadcast packets Number of broadcast packets
multicast packets Number of multicast packets
CRC alignment errors Number of CRC error packets
undersized packets Number of undersized packets
oversized packets Number of oversized packets
fragments Number of undersized and CRC error packets
jabbers Number of oversized and CRC error packets
collisions Number of collision packets
utilization Utilization