3Com Switch 8800 Family Command Reference Guide

986 CHAPTER 58: DEVICE MANAGEMENT COMMANDS
display schedule reboot Syntax
display schedule reboot
View
Any view
Parameter
None
Description
Use the display schedule reboot command to check the configuration of related
parameters of the switch schedule reboot terminal service.
Related command: reboot, schedule reboot at.
Example
# Display the configuration of the schedule reboot terminal service parameters
of the current switch.
<SW8800> display schedule reboot
System will reboot at 16:00:00 2004/11/1 (in 2 hours and 5 minutes).
reboot Syntax
reboot [ slot slot-no ]
View
User view
Parameter
slot slot-no: Specifies the physical card number.
Description
Use the reboot command to reboot to restart the switch or the specified card.
Example
# Reset the switch.
<SW8800> reboot
schedule reboot at Syntax
schedule reboot at hh:mm [ yyyy/mm/dd ]
undo schedule reboot
View
User view
Parameter
hh:mm: Reboot time of the switch, in the format of "hour: minute" The hh ranges
from 0 to 23, and the mm ranges from 0 to 59.