3Com Switch 8800 Family Configuration Guide

120 CHAPTER 16: MAC ADDRESS TABLE MANAGEMENT
Network diagram
Figure 22 Network diagram for address table management configuration
Configuration procedure
# Enter the system view of the switch.
<SW8800> system-view
# Add a MAC address (specify the native VLAN, port and state).
[SW8800] mac-address static 00e0-fc35-dc71 interface ethernet2/1/2 vlan 1
# Set the address aging time to 500s.
[SW8800] mac-address timer 500
# Display the MAC address configurations in any view.
[SW8800] display mac-address interface ethernet2/1/2
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
00-e0-fc-35-dc-71 1 Static Ethernet2/1/2 NOAGED
00-e0-fc-17-a7-d6 1 Learned Ethernet2/1/2 500
00-e0-fc-5e-b1-fb 1 Learned Ethernet2/1/2 500
00-e0-fc-55-f1-16 1 Learned Ethernet2/1/2 500
--- 4 mac address(es) found on port Ethernet2/1/2 ---
Console Port
Network Port
Switch
Internet