3Com Switch 8800 Family Configuration Guide

ACL Configuration Tasks 169
A maximum of 12288 ACL rules can be activated on the whole service processor
card.
ACL Configuration
Task s
The following table describes the ACL configuration tasks for interface cards.
3C17511
3C17512
3C17513
3C17514
3C17516
3C17526
3C17532
3C17532
MPLS not supported 1024
3C17525
3C17527
3C17530
3C17531
MPLS supported 1023
Table 144 Max ACL rules that can be activated on different interface cards
Interface card suppfix MPLS support
Max number of ACL rules
supported for each
card/interface
Tab le 145 ACL configuration tasks on interface cards
Item Command Description
Enter system view system-view -
Configure the time range
time-range time-name {
start-time to end-time
days-of-the-week [ from
start-time start-date ] [ to
end-time end-date ] | from
start-time start-date [ to
end-time end-date ] | to
end-time end-date }
Optional
Define a flow template
flow-template
user-defined slot slotid
template-info
Optional
Enter ACL view
acl { number acl-number |
name acl-name [ advanced |
basic | link ] } [ match-order
{ config | auto } ]
Required
Define a rule rule Required
Exit ACL view quit -
Enter Ethernet port view
interface interface-type
interface-number
The value of interface-type
can only be Ethernet port
type.
Apply a defined flow template
in Ethernet port view
flow-template
user-defined
Optional. You can perform
this operation only when a
flow template has been
previously defined.