3Com Switch 8800 Family Configuration Guide

QoS Configuration Example 205
4 Define the DSCP + Conform-Level -> Service parameter mapping table.
# Define the DSCP + Conform-Level -> Service parameter mapping table. Allocate
a set of service parameters for the packets from PC1 according the mapping table
for DSCP 63.
[SW8800] qos conform-level 0
[3Com-conform-level-0] dscp 63 : 32 4 4 4 0
The modified DSCP + Conform-Level -> Service parameter mapping table:
5 Re-allocate service parameters for the packets from PC1.
# Re-allocate service parameters for the packets from PC1.
[3Com-GigabitEthernet7/1/1] traffic-priority inbound ip-group 2000
remark-policed-service dscp 63
Traffic Redirection
Configuration Example
Network requirements
Forward the packets sent from PC1 (IP 1.0.0.1) during the time range from 8:00 to
18:00 every day to the address 2.0.0.1.
Network diagram
Figure 50 Network diagram for traffic redirection configuration
Configuration procedure
1 Define the time range.
# Define the time range from 8:00 to 18:00.
6 0
7 0
Table 178 Modified CoS-> Conform-Level mapping table
CoS Value Drop-precedence
Tab le 179 Modified DSCP + Conform-Level -> Service parameter mapping table
DSCP CL
Policed-
DSCP
Policed-
exp
Policed-
802.1p
Policed-Localprec
Policed-Drop
Precedence
63 0 32 4 4 4 0
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
VLAN3,
2.0.0.1/8
PC1
PC2
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
VLAN3,
2.0.0.1/8
PC1
PC2