3Com Switch 8800 Family Configuration Guide

278 CHAPTER 27: PORTAL CONFIGURATION
Portal Rate Limit
Function
Configuration
Portal Rate Limit
Function Configuration
Procedure
Portal Rate Limit
Function Configuration
Example
Network requirements
■ The upload interface for Portal rate limit is specified.
Network diagram
Refer to Figure 66.
Configuration procedure
# Specify Ethernet2/1/10 as the upload interface for Portal rate limit.
[3Com-Ethernet2/1/10]portal upload-interface
Portal User Deletion
Portal User Deletion
Procedure
Portal User Deletion
Configuration Procedure
Network requirements
■ Delete the Portal user using the IP address 172.31.1.2.
Configuration procedure
# Delete the user using the IP address 172.31.1.2
[SW8800] portal delete-user 172.31.1.2
Tabl e 246 Portal rate limit function configuration procedure
Operation Command Description
Enter system view system-view -
Enter interface view interface Ethernet X/X/X -
Configure the Portal rate limit
function on upload interfaces
portal upload interface
By default, the Portal rate limit
function is disabled.
Tabl e 247 Portal user deletion procedure
Operation Command Description
Enter system view system-view -
Delete the Portal user using the
specified IP address
portal delete-user ip-address -