3Com Switch 8800 Family Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module

471

472

473

474

475

476

477

478

479

480

PIM-SM Configuration Example 471

[SW8800] multicast routing-enable

[SW8800] vlan 10

[3Com-vlan10] port ethernet 2/1/2 to ethernet 2/1/3

[3Com-vlan10] quit

[SW8800] interface vlan-interface 10

[3Com-vlan-interface10] igmp enable

[3Com-vlan-interface10] pim sm

[3Com-vlan-interface10] quit

[SW8800] vlan 11

[3Com-vlan11] port ethernet 2/1/4 to ethernet 2/1/5

[3Com-vlan11] quit

[SW8800] interface vlan-interface 11

[3Com-vlan-interface11] igmp enable

[3Com-vlan-interface11] pim sm

[3Com-vlan-interface11] quit

[SW8800] vlan 12

[3Com-vlan12] port ethernet 2/1/6 to ethernet 2/1/7

[3Com-vlan12] quit

[SW8800] interface vlan-interface 12

[3Com-vlan-interface12] igmp enable

[3Com-vlan-interface12] pim sm

[3Com-vlan-interface12] quit

# Configure the C-BSR.

[SW8800] pim

[3Com-pim] c-bsr vlan-interface 10 30 2

# Configure the C-RP.

[SW8800] acl number 2000

[3Com-acl-basic-2000] rule permit source 225.0.0.0 0.255.255.255

[SW8800] pim

[3Com-pim] c-rp vlan-interface 10 group-policy 2000

# Configure PIM domain border.

[SW8800] interface vlan-interface 12

[3Com-vlan-interface12] pim bsr-boundary

After VLAN-interface 12 is configured as domain border, the LSD will be excluded

from the local PIM domain and cannot receive the BSR information transmitted

from LSB any more.

Configure LSC.

# Enable PIM-SM.