3Com Switch 8800 Family Configuration Guide

642 CHAPTER 52: VPLS CONFIGURATION
A VPLS instance can be bound to multiple VLANs. You can bind a VPLS instance
to up to eight VLANs.
It is not allowed to bind VSI instances to VLAN-interface1.
Configuring Static MAC
Address
Use the mac-address command to configure a static MAC address for the VPLS
instance. The address you configured can be either a MAC address on a local CE
or a MAC address on a remote CE.
Perform the following configuration in system view.
Enabling VLAN VPN on a
Port
c
CAUTION: User access mode of VSI determines whether you should enable
VLAN-VPN on a port or not. If the access mode is Ethernet, you must enable
VLAN-VPN on the access port such that your private VLAN Tag can be properly
transferred. If the access mode is VLAN, you must set the access port to Trunk.
Perform the following configuration in Ethernet port view.
c
CAUTION:
If GARP VLAN registration protocol (GVRP), spanning tree protocol (STP) or
802.1x protocol is enabled on a port, VLAN VPN on this port is not allowed to
enable.
If IGMP Snooping is enabled in the VLAN to which the port belongs or if IGMP
is enabled on the VLAN interface to which the port belongs, it is not allowed to
enable VLAN VPN on the port, and vice versa.
If a port with enabled VLAN VPN is to join in a VLAN, IGMP Snooping cannot
be enabled on the VLAN and IGMP cannot be enabled on its VLAN interfaces.
By default, VLAN VPN is disabled on ports.
Configuring
user-defined flow
template
Perform the following configuration in system view.
Tabl e 579 Configure static MAC address
Operation Command
Configure a static MAC
address for VPLS instance
mac-address { static H-H-H } vsi vsi-name { peer peer-ip |
vlan-interface vlan-interface-number }
Remove the MAC address undo mac-address { static H-H-H } vsi vsi-name
Batch delete the MAC
addresses of VPLS instances
undo mac-address vsi [ vsi-name [ peer peer-ip |
vlan-interface vlan-id ] ] [ static | dynamic ]
Tabl e 580 Enable VLAN VPN on a port
Operation Command
Enable VLAN VPN on a port vlan-vpn enable
Disable VLAN VPN on the port undo vlan-vpn