3Com Switch 8800 Family Configuration Guide

738 CHAPTER 64: SNMP CONFIGURATION

Figure 173 Architecture of the MIB tree

The MIB (Management Information Base) is used to describe the hierarchical

architecture of the tree and it is the set defined by the standard variables of the

monitored network device. In the above figure, the managed object B can be

uniquely specified by a string of numbers {1.2.1.1}. The number string is the

Object Identifier of the managed object.

The current SNMP Agent of switch supports SNMP V1, V2C and V3. The MIBs

supported are listed in the following table.

Configuring SNMP The following sections describe the SNMP configuration tasks.

■ “Setting Community Names”

■ “Setting the System Information”

■ “Enabling/Disabling SNMP Agent to Send Trap”

Tabl e 677 MIBs supported by the switch

MIB attribute MIB content References

Public MIB

MIB II based on TCP/IP network device RFC1213

BRIDGE MIB

RFC1493

RFC2675

RIP MIB RFC1724

RMON MIB RFC2819

Ethernet MIB RFC2665

OSPF MIB RFC1253

IF MIB RFC1573

Private MIB

DHCP MIB -

QACL MIB -

ADBM MIB -

RSTP MIB -

VLAN MIB -

Device management -

Interface management -