Manualshelf

3Com Switch 8800 Family Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve 8116fl Redundant Switch Fabric Module
791792793794795796797798799800
Device Management Configuration Example 799
c
CAUTION: If the Flash Memory on the switch is not sufficient, delete the original
application program in the flash before uploading the new one into the flash of
the switch.
1 After uploading, performs upgrading on the switch.
<SW8800>
# You can use the boot boot-loader command to specify the new file as the
application program on the next booting and reboot the switch to implement the
upgrading of the application program.
<SW8800> boot boot-loader primary flash:/switch.app slot 0
<SW8800> reboot