3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

Displaying Information about the Firewall Module 15
Configuring Default
Login User Function
For login convenience, a user whose name and password are both SecBlade is
created in the Firewall module. You can use this user name and password to log
into the Firewall. Perform the following configuration in SecBlade system view.
By default, default login user function is enabled. That is, the user created
internally in the module is allowed to log into the Firewall.
Displaying
Information about the
Firewall Module
After the above configuration, execute the following command in any view to
display information about the module to verity the effect of the configuration.
Tab le 7 Log into the Firewall
Operation Command
Log into the Firewall secblade slot slot-number
Tab le 8 Configure default login user function
Operation Command
Enable default login user function default-login-user
Disable default login user function undo default-login-user
Tab le 9 Display information about the Firewall module
Operation Command
Display information about the module display secblade [sec-mod-name ]