3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

176 CHAPTER 10: ATTACK PREVENTION AND PACKET STATISTICS
Network procedure
Switch 8807 (SecBlade)
# Divide VLANs.
<SW8800> system-view
[SW8800] vlan 10
[3Com-vlan10] quit
[SW8800] vlan 30
[3Com-vlan30] quit
[SW8800] vlan 50
[3Com-vlan50] quit
[SW8800] vlan 60
[3Com-vlan60] quit
# Configure the IP address.
[SW8800] interface vlan-interface 10
[3Com-Vlan-interface10] ip address 10.0.0.254 24
[3Com-Vlan-interface10] quit
[SW8800] interface vlan-interface 30
[3Com-Vlan-interface30] ip address 30.0.0.1 24
[3Com-Vlan-interface30] quit
# Configure the static route.
[SW8800] ip route-static 0.0.0.0 0 30.0.0.254
# Configure aggregation of the Firewall module interface (the module resides in
slot 2).
[SW8800] secblade aggregation slot 2
# Create a SecBlade test.
[SW8800] secblade test
# Specify the Firewall module interface VLAN.
[3Com-secblade-test] secblade-interface vlan-interface 30
# Set the protected VLAN.
[3Com-secblade-test] security-vlan 50 60
# Map the module to the specified slot.
[3Com-secblade-test] map to slot 2
[3Com-secblade-test] quit
[SW8800] quit
# Log into the module on the specified slot.
<SW8800> secblade slot 2 (Both the default user name and password are SecBlade)
user: SecBlade
password: SecBlade
<secblade> system-view