3Com Switch 8800 Family Firewall Module Configuration and Command Reference Guide

Binary-Flow Log Configuration 183
Binary-Flow Log
Configuration
Binary-flow log configuration includes:
■ Enabling binary-flow log output in interzone
■ Configuring host address and port of receiving binary-flow log
Enabling/Disabling
Binary-Flow Log Output
in Interzone
Use the following commands to enable/disable interzone binary-flow log.
Perform the following configuration in interzone view.
By default, binary-flow log is disabled.
Configuring Host
Address and Port of
Receiving Binary-Flow
Log
Use this command to configure the host address and port of receiving binary-flow
log.
Perform the following configuration in system view.
Tab le 197 Configure the log redirection for the information center
Operation Command
Export information to the console
info-center console channel {
channel-number | channel-name }
Export information to the Telnet terminal or
dumb terminal
info-center monitor channel {
channel-number | channel-name }
Export information to SNMP
info-center snmp channel { channel-number
| channel-name }
Set the log buffer size, and set the
information channel to the log buffer
info-center logbuffer [ channel {
channel-number | channel-name } | size
buffersize ] *
Set the information channel to the log host
and other parameters
info-center loghost X.X.X.X [ channel {
channel-number | channel-name } | facility
local-number | language { chinese | english }
] *
Set the trap buffer size, and set the
information channel to the trap buffer
info-center trapbuffer [ channel {
channel-number | channel-name } | size
buffersize ] *
Tab le 198 Enable interzone binary-flow log output
Operation Command
Enable to output the binary-flow log matching
ACL
session log enable [ acl-number access-list ]
Disable interzone binary-flow log output undo session log enable
Tab le 199 Configuring host address and port of receiving binary-flow log
Operation Command
Configure host address and port of receiving
binary-flow log
firewall session log-type binary host
ipaddr port
Delete the host address and port of receiving
binary-flow log and restore the default log
output format
undo firewall session log-type